KLINGE IN THE NEWS
Refrigerated Transporter:
Klinge/Morep Quick Thaw Units can reduce drip loss dramatically
Handy Shipping Guide
Klinge Corporation Completes Training for New Australian Military
Reefer Containers
ORDER SPARE PARTS
Visit our online
shop to search for and buy spare parts for transport refrigeration
units, A/C units, generator sets, and related equipment.
Login
|
Register
SERVICE COMPANIES
Search our worldwide network of
contractors that provide service for Klinge, Carrier, Thermo King,
Daikin and other manufacturers at a location near you.
Become a Service Point!
Tank Container Refrigeration Unit: TCR-104
Klinge Corp's TCR-104 heats and cools the tank's cargo by circulating brine or synthetic oil around external cooling coils in the tank. The TCR-104 is used with their Nose Mount Model Generator Set Model NMG-112. The integral generator set powers the TCR-104 Refrigeration Unit during transit or whenever shore power is not available.
This system is used to transport hazardous and non-hazardous chemicals, pharmaceuticals, food products and beverages. Klinge Corp has been providing this model to companies around the world for nearly 30 years.
Klinge's machinery complies with International Customs Regulations for Containers, relevant ISO recommendations, and the rules of B.V., ABS and Lloyds.
TCR-104 & NMG-112 PHOTOS
TCR-104 with Integral Generator Set Model NMG-112
TCR-104
TCR-104 FEATURES
» Unit is compact and lightweight.
» Front mounted unit profiled to the 'dished end'
shape of the tank.
» Easily mountable / demountable.
» Components require low level of maintenance intervals.
» Copeland Scroll compressor offers superior refrigeration capacity and efficiency.
» Easy access chiller section door saves a tremendous amount of time in maintenance and repair.
» Noise level will not exceed 78 db (A) in 250 Hz band, with unit fitted
in the container, when measurement is taken in front of the unit 47-1/4 inch (1.2m) above
bottom and 59 inch (1.5m) distant, when unit is operating at 50 Hz.
TCR-104 SPECIFICATION
» Dimensions: L 84.25 in (2140 mm), D 20.83 in
(529 mm), H 27 in (685 mm)
» Weight: 730 lb (331 kg)
» Machinery is designed to keep chilled or heated cargoes in the
temperature range of 29ºC to +30ºC. Machinery will be in full functional
operation and work satisfactorily although not necessarily within
specified limits, in ambient temperature from -40ºC to +50ºC. Components
are made to withstand temperature up to 158ºF (+70ºC).
» Construction: The refrigeration frame is constructed of aluminum treated
to resist corrosion induced by salt spray atmosphere.
» Compressor: Copeland discus, 1750 rpm
» Chiller: Vertical Attitude, Stainless Steel, Brazed
Plate
» Condenser Coil (Air Cooled): Vertical Attitude,
Copper Tube, Aluminum Fin, Fin Space 10 Per in (3.62 mm)
» Condenser Fan: Propeller, Ø22 in (559 mm), 1750 RPM,
Galvanized Steel Blade, Direct on Motor Shaft
» Condenser Fan Motor: Nominal HP 2, Type TEAO, Sealed
bearing, IP 56, Class H non-hygroscopic
» Refrigerant: R-404A (HP62)
» Designed to operate on: 380/460 Volt A/C +/-10% 3phase 50/60Hz +/-2.5%
» Power requirements:
14 amp / 9Kw
» Control Circuit:
A/C 24 Volts
» Capacity: 100ºF / 37.7ºC Ambient Temperature at 60 Hz power.
Leaving glycol temperature
Net Capacity
0ºF / -17.7ºC
4190 Kcal/h / 16,700 BTU/Hr
35ºF / 0ºC
6518 Kcal/h / 26,000 BTU/Hr
»
OPTIONS: Datalogger, Heater 5 KW,
extra Probes, dual voltage transformer
alarm lamp and horn, satellite
communication
