Leading Manufacturer of Specialized Refrigeration Units and Generator Sets
HomeAboutProductsServicesManualsEmployment ISO 9001:2000 Registered 

»PRODUCTS
 
Refrigeration Units
Generator Sets
Containerized Systems
   NMR-071 & NMG-012
   NMR-171A & NMG-112
   TCR-104 & NMG-112 
Tank Container Refrig.
Tank Container Heating
Dataloggers/Recorders
Satellite Communication
Military
Hazardous



»SERVICES
 
Customer Service
Spare Parts
Service Points/Repairs
Refurbished Products
Technical Support

Service Bulletins
News
Links

 

 CONTAINERIZED SYSTEM
TCR-104 and NMG-112

 

 
   
TCR-104 Refrigeration Unit NMG-112 Generator Set
   
General Information: General Information:
The TCR-104 is an all aluminum refrigeration unit designed to provide high reliability in extreme ambient temperature. A refrigeration system consists of its own compressor, refrigerant piping, condenser coils, thermal expansion valve, chiller, pump, expansion tank and a condenser fan and motor.

The NMG-112 Generator Set was designed for use in the 20’ x 8’ containers and the 20’ x 8’6” containers. The design is compact yet offers easy access to all service parts.

 

   
Construction:
Frame is constructed of aluminum treated to resist corrosion induced by salt spray atmosphere.
Construction:
Aluminum frame                                   
Aluminum doors and closures
Stainless Steel Hardware
   
Temperature Range:
-40°C to +50°C
Temperature Range:
-35°C to + 50°C
   
Dimensions:
Width: 2140 mm (84.25 in)                   
Height: 685 mm (27 in)                         
Depth: 529 mm (20.83 in)
Dimensions:
Length: 2102 mm                                  
Depth: 521 mm                                      
Height: 775 mm
   
Weight:
331 kg (730 LB)
Weight:
300 kg without fuel, 430 kg with fuel
   
Compressor:
1 Copeland discus compressor

Condenser Coil:

Copper tubes, aluminum fins - corrosion treated
Engine:
Yanmar, three cylinder, 4 stroke, liquid cooled
16.1 kW @ 3600 rpm / 13.1 kW @ 3000

   
Refrigerant:
R-404a

Condenser Fan:
One propeller, 559 mm (22 in) diameter, 2.0 HP
Alternator:
Three phases; 2 pole; Single bearing; Brushless; Electronic regulated; 10kW/12.5
kVA/3x380-415/220-240V@50Hz
   
Controls:
Microprocessor with automatic pre-trip and diagnostics
Indicator lights: 8 LEDs for operation and alarm conditions
Voltage 460 V AC/6OHz and 380V AC/5OHz
Phase sensor for automatic phase correction
Fuel :
Diesel fuel or kerosene based fuels as JP-5;
JP-8,
NATO F34 and JET-A
   
Options:
Heater 5 KW; Datalogger; Extra Probes; Dual voltage transformer; Alarm lamp and horn; Satellite tracking and monitoring
Tank Capacity:
144 liter for approximately 50 hours of operation
   


Net Cooling Capacity at 100
° F (37.7° C)
Ambient Temp. at 60 Hz Power

Leaving Glycol Temp. Net Capacity
0°F / -17.7°C 4190 Kcal/h / 16,700 BTU/Hr
35°F / 0°C 6518 Kcal/h / 26,000 BTU/Hr
Controls:
Power circuit breaker
“On”–“Off” and “Start–Preheat” toggle switches
Voltmeter 0-600 VAC; DC Amp-meter
Hour-Meter
Oil pressure and Coolant temperature gauges
Automatic shut down for high coolant temperature
Low oil pressure with light indicators
   
Download the Brochure:
4TCR-104 and NMG-112 System

Battery Starting System:
Battery: 12V / 630 CCA @ -18°C
14V / 40A battery charging alternator
12V / 0.8 kW starting motor

   
All specifications are subject to change without notice.  For further information about this or any Klinge-product, please contact us at any of our offices.
 
 

CONTACT US
Submit an inquiry.

Raise a
complaint.

Complete our Customer Feedback Survey.
     
ORDER PARTS
Visit our online shop to search for and buy spare parts for transport refrigeration units, A/C units, generator sets, and related equipment.
      

Login | Register

       
SERVICE POINTS
Search our worldwide network of contractors that  provide service and parts at a location near you.
     

 

Contact Klinge Corporation

Copyright © Klinge Corporation. All rights reserved.